Most people who tell me they can’t read a map can actually read most of a map. They can find a footpath, a wood, a car park and a church with a tower. What they can’t do is look at a set of brown squiggles and know what the ground is doing.
That’s the bit that matters, and it’s the bit nobody tests you on.
So here’s a test. It’s free, there’s no signup, and it takes about three minutes.
You get a piece of ground and four maps, and you pick the map that fits. Then it flips, and you get a map and four pieces of ground. Six questions a round, three levels, and real British hills once you get to the top level.
Start on Warm up. Work up to Real hills. And say your answer out loud before you click, because clicking about until something goes green doesn’t teach you anything.
Test yourself
Match the ground to the map
Reading contours is a skill, and skills need testing rather than admiring. You get the shape of a piece of ground and four maps, or a map and four pieces of ground. Pick the one that fits.
Click through these three — start on the warm up, then work up to real hills.
—
This one
Drawing the maps…
Elevation data: Ordnance Survey Terrain 50 via AWS Terrain Tiles. Contains OS data © Crown copyright and database right 2026, used under the Open Government Licence v3.0. Contour interval on these thumbnails is set to keep the pattern readable at small size, so it is not always 10 m.
So how did you get on?
Six out of six on Real hills. You can genuinely read ground off a map, which puts you ahead of most people who own walking boots. Go and do something with it.
Four or five. The shapes are going in. Run it again, the questions reshuffle every time and the ones that caught you will come back looking different.
Two or three. You know the theory and you haven’t converted it into recognition yet. That’s a practice problem, not an intelligence problem, and it goes away faster than you’d expect.
Fewer than that. Honestly, no drama. Almost everybody starts here. Nobody is born able to look at a flat piece of paper and see a mountain.
The seven shapes you’re being tested on
Every hill in Britain is built out of these. Learn the seven and there’s nothing left on a map that can surprise you.
- Hill or summit. Closed rings, one inside the next, getting tighter towards the top.
- Valley. Contours making a broad V or U that points uphill, usually with a stream drawn down the middle.
- Ridge. The opposite. A long high spine with the ground dropping away on both sides.
- Col or saddle. The dip between two summits. On the map the rings pinch in the middle like an hourglass.
- Spur. A finger of high ground sticking out from the hillside. The V points away from the high ground.
- Plateau. A wide flat top with very few lines on it. Deceptively hard ground to navigate, because there’s nothing to aim at.
- Crag or steep drop. Lines so close they almost merge, often with black rock shading over them. The one you want to spot from a long way off.
The two that catch nearly everyone
If you dropped marks, I’d put money on it being one of these.
Spur and re-entrant are mirror images. Both make a V. A spur is ground sticking out towards you, so the V points downhill, away from the high ground. A re-entrant is a fold cut back into the hillside, so the V points uphill.
Ridge and valley are the same trap at a bigger scale. A valley has high ground either side of it. A ridge has low ground either side. If there’s a blue line drawn along it, it’s a valley, because water does not run along the top of a ridge.
The fix for both is the same, and it’s the single most useful habit in map reading. When two shapes look alike, stop looking at the shape and go and find the height numbers. The pattern tells you what kind of feature it is. The numbers tell you which way up it is.
Why this is worth getting right
I’ve been teaching in the UK hills for over fifteen years, and contours are the thing I come back to more than anything else.
Here’s the reason. Almost everything else on a map can let you down. Woods get felled. Streams dry up in summer. Paths get rerouted, fences come down, and the sheet in your rucksack is probably a few years old already.
The shape of the ground doesn’t change. That valley was there long before the map was printed and it’ll be there long after.
Which means when the cloud comes down and you can see forty metres in front of you, contours are what’s left. Not the view, not the landmarks, not your phone if the battery’s gone. The shape of the ground under your boots, matched against the shape on the paper.
Get good at this one thing and you’re a long way towards never being properly lost.
Where to go next
If the quiz showed up gaps, don’t just run it again and hope. Go and look at the thing properly.
The interactive contour tool puts the map and a 3D model of the same hill side by side, so you can move across one and watch the other. Ten minutes with that does more than an hour of reading. And if you want the written explanation with proper examples, how to read contour lines on an OS map walks through each shape one at a time.
Get the free course
Reading the ground is one half of it. Not getting into trouble in the first place is the other half, and that’s mostly about what you do before you leave the house.
The Hill Walker’s Digital Safety Net is free, it’s thirteen short lessons, and it covers the things that actually go wrong. Getting a grid reference off your phone when you need one. Registering for Text 999 before you’re in a spot with no signal. Making your maps work offline. Keeping your battery alive in the cold.
It takes an evening and you get instant access.
And if you’d rather learn the whole thing properly, map and compass from the ground up, that’s what the Mountain Navigation Course is for. Same tools as this one, plus everything that comes after contours.
Either way, go and get a map out this week and name the shapes on it. That’s the whole skill.
How do I read contour lines on an OS map?
Contour lines join points of equal height, so the pattern they make is the shape of the ground. Lines close together mean steep ground, lines far apart mean gentle ground. Closed rings mean a summit, a V pointing uphill is a re-entrant, and a V pointing downhill is a spur. The quiz on this page tests exactly that.
What is the difference between a spur and a re-entrant?
They are mirror images and this is the pair that catches most people. A spur is ground sticking out from the hillside, so the V in the contours points away from the high ground. A re-entrant is a fold cut back into the hillside, so the V points towards the high ground. Find the height numbers and see which way the V points relative to them.
Is this contour lines quiz free?
Yes. There is no signup, no email and no limit on how many times you can run it. The questions reshuffle every round, so it is worth several goes.
Are these real maps?
The contours are worked out from Ordnance Survey Terrain 50 open elevation data and drawn in OS style, so the hills are genuine British ground. They are not scans of Explorer or Landranger sheets. Your paper map will always carry more detail than any model.
What should I learn after this?
If you are scoring well, move on to timing, pacing and compass work. If you are not, spend time with the interactive contour tool first. The free Digital Safety Net course is the best next step either way.
